This resulted in a large-scale update arriving in Monaco with further adaptations being implemented throughout the remainder of the season.

Let’s take a detailed look at some of the car’s fine details in full, and how that big development program was rolled out to overtake Ferrari for second place in the Constructors’ Championship.

Photo by: Giorgio Piola

Mercedes W13 and W14 side comparison

A comparison of the W13 and W14, showing how the zeropod’s inlet had been pushed back for 2023.

Read Also:

Photo by: Giorgio Piola

Mercedes W14 brake detail

A look at the front brake assembly without the drum in place gives us a glimpse of the collar used to hold some of the internal fairings in place.

Mercedes W14, floor detail

A close up of the forward portion of the W14’s floor, including the mini-scroll section with a row of vortex generators housed on it and a perforated Gurney arrangement above it, while aft of that is the workshop scroll section of the edge wing with a divisible strake on the surface.

Photo by: Giorgio Piola

Mercedes W14 technical detail

Beneath the covers of the W14 we’re able to see how the radiators and ancillaries are package around the power unit and sidepods.

Photo by: Giorgio Piola

Mercedes W14 steering wheel detail

The back of the Mercedes Steering wheel shows a single wishbone paddle gearshift lever at the top and an elongated single paddle clutch arm runs across the bottom, which is fitted with a finger socket to help modulate the release.

Photo by: Giorgio Piola

Mercedes W14 front wing

Mercedes continued to employ a variation of the open-ended front wing flap and endplate juncture in 2023, although it also included two new winglets above the rear elements.

Photo by: Giorgio Piola

Mercedes W14 middle wing detail

Having the zeropod’s inlet further back, the side impact spar (SIS) wing fairing became more of an independent surface.

Photo by: Uncredited

Mercedes W14 details

The W14’s rear brake assembly without the drum in place allows us to see how the caliper is fed cool air by its fairing.

Photo by: Uncredited

Mercedes W14 technical detail

Another view of the scrolled edge wing design, which notably has metal support brackets that are positioned and shaped to improve their aerodynamic output.

Photo by: Uncredited

Mercedes W14 technical detail

A close up of the SIS fairing, the wing mirror, vortex generators and slatted mirror stalk.

Photo by: Uncredited

Mercedes W14 rear detail

A look at the W14’s diffuser, with the mouse house visible in the sidewall and the trumpeted upper corner. Also note the stepped lower edge on the rear brake duct winglet.

Photo by: Uncredited

Mercedes W14 details

A close up of the bib wing, with the flexible material used to allow that section to move up and down when it comes into contact is also a notable feature.

Photo by: Giorgio Piola

Mercedes W14 front detail

A massive update arrived at the Monaco Grand Prix, which not only resulted in the W14 having a more ‘traditional’ sidepod design thereafter but also saw the upper wishbone realigned.

Read Also:

Photo by: Giorgio Piola

Mercedes W14 sidepods winglet detail

The lead arm on the upper wishbone was raised (inset), while a new winglet could be found on the W14’s floor (blue arrow) and the SIS fairing’s hanging vane was also modified (red arrow).

Photo by: Mark Sutton / Motorsport Images

Mercedes F1 W14 car detail

The floor edge wing was also modified, with additional strakes added to the scrolled section’s surface.

Photo by: Uncredited

Mercedes W14 technical detail

Small cooling gills were also added to the sidepod’s shoulders when required.

Mercedes W14 button view

An off for Lewis Hamilton at the Monaco Grand Prix led to the W14 being craned away from the circuit and provided us with a rare glimpse of the underfloor, which is full of complex geometries.

Photo by: Uncredited

Mercedes W14 details

A much larger cooling gill panel was installed for the Spanish Grand Prix to help keep temperatures under control.

Photo by: Uncredited

Mercedes W14 nose and front wing detail

A rare glimpse of the nose and front wing assembly from beneath.

Photo by: Giorgio Piola

Mercedes W14 new front wing comparison, British GP

A new front wing arrived at the British Grand Prix and featured revisions to the mainplane and wing tips in the outer section, a more cambered endplate design and a more aerodynamically shaped slot gap separator bracket.

Photo by: Giorgio Piola

Mercedes W14 front wing detail

A top-down overview of the new front wing design, with most of the details changed at the outboard end of the wing.

Photo by: Giorgio Piola

Mercedes W14 rear wing end plate

Mercedes introduced an open-ended endplate variant at the Hungarian Grand Prix, altering the size and shape of the rear endplate cutout.

Photo by: Giorgio Piola

Mercedes W14 suspension detail, Hungarian GP

The lead arm of the front suspension’s upper wishbone was modified again for Hungary, with a dipped profile added to the fairing (red arrow).

Photo by: Giorgio Piola

Mercedes W14 sidepods detail, Belgian GP

The vortex generating fins and mirror stalk slat were removed for the Belgian Grand Prix to reduce drag, while the scrolled section of the edge wing saw the strakes attached to it reduced from three to two.

Photo by: Giorgio Piola

Mercedes W14 rear wing comparison

Mercedes tried different rear wing configurations at the Belgian Grand Prix to find the right balance for their drivers, with an infill panel for the endplate and no Gurney on the trailing edge of the upper flap employed on George Russell‘s car, while Hamilton’s car was set up with a lower downforce wing, endplate cutout and a Gurney on the trailing edge.

Photo by: Uncredited

Mercedes W14 details

The scrolled section of the edge wing at the Dutch Grand Prix, with just two strakes dividing the surface.

Photo by: Giorgio Piola

Mercedes W14 DRS

A close up of the DRS mechanism on the W14.

Photo by: Filip Cleeren

Mercedes W14 technical detail

A single element beam wing and the endplate infill panels were paired with a lower downforce rear wing configuration for the Italian Grand Prix.

Photo by: Uncredited

Mercedes W14 technical detail

This shot of the W14 without the bodywork in place gives a chance to see the internal stays used to prevent the floor from flexing.

Photo by: Filip Cleeren

Mercedes W14 technical detail

Mercedes added a swage line to the lower half of its rear wing endplate at the Japanese Grand Prix.

Photo by: Giorgio Piola

Mercedes W14 floor – Austin (Old spec inset)

Mercedes revised the scrolled section of the edge wing once again, at the United States Grand Prix, with tufts also employed during practice to capture some real-world information on the new parts performance.